Lockouts
-
Master Lock® S806 Adjustable Cable Lockout With Label - Danger Do Not Operate - 6 ft L - 4 Padlock - Red/Silver
-
Master Lock® 491B Clamp-On Single Pole Circuit Breaker Lockout - For Use With Circuit Breakers - 120/277 V - Red - Steel
-
Master Lock® 493B Clamp-On Circuit Breaker Lockout, For Use With Circuit Breakers, 120/240 V, 9/32 in Shackle, Red
-
Master Lock® 482 Rotating Gate Valve Lockout - 5/16 in Shackle - 4 Padlocks - 4 - 6-1/2 in Fits Handle
-
Master Lock® 483 Rotating Gate Valve Lockout - 5/16 in Shackle - 4 Padlocks - 6 - 10 in Fits Handle - Thermoplastic
-
Master Lock® S3068 Handle-On Ball Valve Lockout - 9/32 in Shackle - 1 Padlocks - 1/4 - 4 in Fits Handle - Steel/Aluminum
-
The adjustable design fits 1/2in (25mm) to 2in (51mm) valves and four locking holes accept all American Lock® and Master Lock® safety padlocks.
-
The patented device features a thumb turn dial screw for easy attachment, no tools required. Device attaches to circuit breaker and makes dial inaccessible in the locked position to prevent removal. Padlock can be applied horizontally or vertically, and design allows device to be mounted side-by-side on adjacent breakers.
-
The Master Lock No. S2151 Removable Push Button and Rotary Switch Cover prohibits access to a switch or control. The cover fits both 30.5mm and 22.5mm diameter switches and accommodates buttons up to 2in (51mm) diameter and 1-3/4in (44mm) tall. The horse-shoe shaped retrofit base allows use with raised nameplates and off-center installation to accommodate rotary switch knobs and clear bases and cover allow visibility of nameplates and labels.
-
The Master Lock No. S2005 Compact Plug Prong Lockout features a compact design to lock out smaller plugs easily and effectively. Patented plug lockout grips prongs of 110-120 volt plugs and fits two prong plugs with and without ground.
-
The Master Lock No. S3900 Pneumatic Lockout Device features stainless steel construction for corrosion resistance and fits virtually all male pneumatic fittings. This lockout device prevents pneumatic fitting from being connected to pressurized air source.
-
The Master Lock No. S2153 Installed Push Button and Rotary Switch Cover prohibits access to a switch or control. The cover fits both 30.5mm and 22.5mm diameter switches and accommodates buttons up to 1-9/16in (40mm) diameter and 1-3/4in (44mm) tall. Device is captured by the rotary or pushbutton switch bezel and features a clear base and cover to allow visibility of nameplates and labels.
Can’t find what you’re looking for?
Contact your local branch today or reach out to one of our knowledgeable reps for help sourcing your product needs.
