Lockouts
-
Master Lock® S806 Adjustable Cable Lockout With Label - Danger Do Not Operate - 6 ft L - 4 Padlock - Red/Silver
-
Master Lock® 491B Clamp-On Single Pole Circuit Breaker Lockout - For Use With Circuit Breakers - 120/277 V - Red - Steel
-
Master Lock® 493B Clamp-On Circuit Breaker Lockout, For Use With Circuit Breakers, 120/240 V, 9/32 in Shackle, Red
-
Master Lock® 482 Rotating Gate Valve Lockout - 5/16 in Shackle - 4 Padlocks - 4 - 6-1/2 in Fits Handle
-
Master Lock® 483 Rotating Gate Valve Lockout - 5/16 in Shackle - 4 Padlocks - 6 - 10 in Fits Handle - Thermoplastic
-
Master Lock® S3068 Handle-On Ball Valve Lockout - 9/32 in Shackle - 1 Padlocks - 1/4 - 4 in Fits Handle - Steel/Aluminum
-
Master Lock® 1457VE3KA Keyed Alike Personal Lockout Kit - 9/32 in Shackle - Laminated Steel
-
The Master Lock S3502 Wall Mount Group Lock Box contains a 12-lock hand caddy and removable key cup. Includes 12 exterior lock holes for personal safety locks, plus a hole in the latch for the control lock. A clear, impact-resistant window allows users to view locks and key(s) secured inside the box.
-
The Master Lock S3501 Permit Display Case holds letter-size documents and other paperwork up to 11-3/4in x 16-1/2in (297 x 420mm). A clear, impact-resistant window allows users to view and protect permit documents. Case is sealed to help prevent water damage in outdoor applications or during cleaning. Includes a carrying handle.
-
The adjustable design fits 1/2in (25mm) to 2in (51mm) valves and four locking holes accept all American Lock® and Master Lock® safety padlocks.
-
The patented device features a thumb turn dial screw for easy attachment, no tools required. Device attaches to circuit breaker and makes dial inaccessible in the locked position to prevent removal. Padlock can be applied horizontally or vertically, and design allows device to be mounted side-by-side on adjacent breakers.
-
The Master Lock No. S2151 Removable Push Button and Rotary Switch Cover prohibits access to a switch or control. The cover fits both 30.5mm and 22.5mm diameter switches and accommodates buttons up to 2in (51mm) diameter and 1-3/4in (44mm) tall. The horse-shoe shaped retrofit base allows use with raised nameplates and off-center installation to accommodate rotary switch knobs and clear bases and cover allow visibility of nameplates and labels.
Can’t find what you’re looking for?
Contact your local branch today or reach out to one of our knowledgeable reps for help sourcing your product needs.
