Nails & Screws

Hammer Drive Anchor Zamac Nailin 1/4"x1 1/4" 100/bx

• Use for light duty, tamperproof applications
• Corrosion resistant

#6x1" DryWall Screw 1000/bx 10bx/cs

3 Fluted Masonry Nail #50 Box

• Durable, tempered hardened steel material with a fluted design
• Vertical thread for driving into cinder block, mortar joints, or other relatively soft masonry to mi...
• Heat treated process to increase resistance to bending when driven into hardwood or masonry

12 Penny Common Nails, 50 lb

2.5" Fluted Masonry Nails, Tempered Hardened Steel

• Durable, tempered hardened steel material with a fluted design
• Vertical thread for driving into cinder block, mortar joints, or other relatively soft masonry to mi...
• Heat treated process to increase resistance to bending when driven into hardwood or masonry

Cone Point, Attached Square Nut,

• Allied Bolt marking (ABI) appears on the head of each bolt.
• Hot dip galvanized
• Minimum thread length is 6\"

Cone Point, Attached Square Nut

• Allied Bolt marking (ABI) appears on the head of each bolt.
• Hot dip galvanized
• Minimum thread length is 6"

5 Inch Ring Shank Nail, 1" Cap for use in creating Vapor Barriers

• Ideal for securing moisture barrier and other ground cover products such as polyethylene, burlap and...
• Simplifies the procedure of preventing soil moisture from damaging beams, joists, and floors
• Sharp point easily deflects any small stones and similar items

16-Penny Bright Steel Duplex Nails, Smooth Shank, 50 lb

• Made of steel construction
• Diamond point tip for easier driving
• Uncoated, smooth shank and double head aids in easier removal

12D Common Nail, 50lb Carton, 11/32" Head, 8 Gauge, 3-1/2" Length

• Bright Finish
• Smooth Shank
• Used in general building such as framing, sheathing, trim & finish

8D Common Nail, 50lb Carton, 9/32" Head, 10.25 Gauge, 2-1/2" Length

• Bright Finish
• Smooth Shank
• Used in general building such as framing, sheathing, trim & finish

20D Common Nail, 50lb Carton, 13/32" Head, 6 Gauge, 4" Length

• Bright Finish
• Smooth Shank
• Used in general building such as framing, sheathing, trim & finish